Greenglue Lydisoleringmasse tube 830ml

NYHET! AutoCalc lar deg automatisk beregne ditt materialbehov for en komplett lydisolasjon av ditt rom >>

---

NB! Husk å bestille applikatorpistolen også (tilbehør) da GreenGlue tubene er for stor for vanlige applikatorer.

Hver tube (langt større enn standard tuber) inneholder 28oz = 0,83l masse. Det anbefales at en benytter mellom 2 tuber pr. standard gipsplate (1,2×2,4m), hvilket betyr at du bør beregne rundt  0,6 tuber pr. kvm. Skal du altså f.eks. dekke en vegg på 15kvm og benytter 2 tuber pr. gipsplate kjøper du 15×0,6=9 tuber.

 

Datablader & rapporter:

UL Flame and SMoke Generatation for Green GLue compound and Sealant 2016-05-10

CARB 310 Green Glue Noiseproofing Sealant saintgobain-214-08-031_VOC Emission

BPD3 Green Glue

greenglue_leed_report_2_0

Informasjon fra produsent (engelsk):

Green Glue is a liquid, waterborne, viscoelastic damping compound which represents the highest performance product of it’s type. We are aware of no product available to the construction market which can deliver damping levels even 30% as high as those offered by Green Glue. It is also significantly lower in applied cost than competitive products, giit a good cost/performance ratio in the damping of normal construction mateving rials such as drywall, wood products, etc. Finally, it is remarkably tolerant to real-world application conditions and carries almost none of the burden of precision required by many damping systems.

– Non toxic
– No mixing required
– Simple, familiar, «caulk gun» application
– Considerably reduced application cost
– Light material squeezes from tubes easily low worker fatigue

Walls and Ceiling
– Improved sound isolation
– Constructions with outstanding low frequency isolation are possible
– Thoroughly lab tested
– Eliminates short circuit risk in resilient channel walls
– Allows construction of the highest performance walls possible (in combination with double stud walls)
– Reduction in structure-borne sound
– Low cost product = great $$$/performance

Floors:
– Reduced impact noise
– Improved resistance to airborne sound
– Lower in cost than most floor treatments
– Reduction in structure-borne sound

Other Applications:
– Tremendous performance is risers, equipment platforms, stages, and other unique structures found in home theaters.
– DIY and OEM loudspeaker construction – more inert cabinets with damping factors up to 20x higher than raw MDF

Specifications:
Active Content:
68% +/-5%
Working Time:
>30 minutes*
Cure Time:
7 days
Viscosity:
Light Paste (65,000 cps)
Odor:
Mild (Temporary)
VOC:
<2g/liter
Flash Point:
>200 deg F
Application Temp:
40-90 deg F
Damping Factor:
Typically 0.50+ with 2*5/8 fire code drywall
(3X higher than any competitive product we are aware of)
Coverage:
Approx. 16 sq ft per tube at full coverage

Intallasjonsguide fra produsent: https://www.greengluecompany.com/Installation